News: b48

bootmod3: MINI F54 F55 F56 F57 F60 support - Now Available!

By Bertan Kazazic

bootmod3: MINI F54 F55 F56 F57 F60 support - Now Available!
bootmod3 closed beta for the MINI B46/B46 2014-2019 vehicles has been a great success and we're excited to announce the official release is here!

B46 / B48 engine MINI Vehicles supported (if your vehicle is not listed please inquire with us):

  • 2015-2019 F54 (Includes JCW models)
  • 2014-2019 F55
  • 2014-2019 F56 (Includes JCW models)
  • 2014-2019 F57 (Includes JCW models)
  • 2015-2019 F60 (Includes JCW models) 
All of the standard bootmod3 features along with a number of OTS (Off The Shelf) maps and the integrated Map Editor are available. Initial flash time that includes unlocking the DME is around 3 minutes and switching maps takes just seconds using the standard ENET-OBD cable.

Licenses can be purchased through your nearest bootmod3 Authorized Dealer or by clicking on the link provided below:


https://protuningfreaks.com/collections/bootmod3/products/bootmod3-b48-b46-mini-cooper-s-jcw-tune

MINI FEATURES INCLUDED WITH PURCHASE TODAY
  • Mobile app (iOS and Android) and Web (http://www.bootmod3.net)  including Windows and macOS support
  • One OTS map/tune included with the purchase and any other maps labeled as "FREE"
  • Datalogging hundreds of diagnostic channels with the highest throughput and sample rates available
  • Datalog sharing and charting without a need to upload to 3rd party websites or apps using the mobile app or web browser
  • Cloud-based storage for map data and datalogs
  • Reverting back to stock performance map and re-locking the DME to stock programming
  • Live Dash - realtime vehicle parameter monitoring via in-app gauges
  • Diagnostics
  • Read and clear trouble codes in all vehicle modules
  • Reset learned adaptations (octane, knock, Valvetronic, etc)
  • ECU power reset
  • (Optional) Off the shelf (OTS) tunes for 91/93/Race gas/E85 octane
  • (Optional) Custom tuning available through tuners in the bootmod3 Tuner Directory. bootmod3 contains a full map editor so you can tune your car yourself or with your local tuner of choice as well.

    Some of the OTS and possible aftermarket turbo upgrade custom map features provided by the bootmod3 platform :

    • Map Customization through Map Editor
    • Exhaust Burble adjustments on any map (OTS & Custom)
    • Cold start (cat heating on startup) removal for quieter cold start
    • Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
    • Exhaust Flap Adjustments (Sport Mode)
    • Top Speed Limiter Removal
    • Boost By Gear % Reduction
    • Re-calibrated Sport Gauges on iDrive
    • E85/blend, RaceGas, and Meth Injection Tuning
    2014-2019 MINI vehicles supported span two main engine types, one with lower and other with higher engine compression. Below are the power gains from the currently released OTS Maps:
    B48-H (High Compression) models:
    Stage 1 ACN91 octane: up to 30% HP / 32% TQ
    Stage 1 91 octane: up to 40% HP / 43% TQ
    Stage 1 93 octane: up to 42 % HP / 44% TQ
    Stage 2 ACN91 octane: up to 45% HP / 46% TQ
    Stage 2 91 octane: up to 50% HP / 48% TQ
    Stage 2 93 octane: up to 54% HP / 50% TQ

    B48-L (Low Compression) models:
    Stage 1 ACN91 octane: up to 10% HP / 13% TQ
    Stage 1 91 octane: up to 12% HP / 15% TQ
    Stage 1 93 octane: up to 14% HP / 16% TQ
    Stage 2 ACN91 octane: up to 15% HP / 16% TQ
    Stage 2 91 octane: up to 19% HP / 18% TQ
    Stage 2 93 octane: up to 22% HP / 20% TQ

    Read more


    bootmod3 electronics: Rev2 CANBus Integration Board

    By Bertan Kazazic

    bootmod3 electronics: Rev2 CANBus Integration Board
    Exciting news from the bm3 electronics team! With the Rev1 version of our CANBus sensor hub board completed, and now focusing on an enclosure design, we have finalized our Rev2 design as well. As mentioned in our previous post, Rev2 board builds further on the Rev1 design by expanding its input sensing abilities and adds 6 outputs.
    The smaller Rev1 board features configurable CANBus conversion for 2 frequency inputs (e.g. flex sensor input), and 3 analog 0-5v inputs and will be a lower cost option for those looking to simply hook up a flex fuel sensor and possibly monitor any other sensors needed (e.g. low pressure side fuel pressure sensor on N55/B58) and be able to get Flex Fuel running using BM3 custom software enhancements right inside the DME. For flex fuel sensor integration, Zeitronix ECA2 and any other similar boards are also supported.
    The Rev2 board keeps the 2 frequency inputs like the Rev1, adds 2 EGT sensor inputs, expands from 3 to 8 analog 0-5v analog inputs and adds 6 outputs. All i/o is canbus integrated for sensing and control of canbus connected systems, primarily the DME. Both boards have integrated WiFi/BLE and all configuration is done over WiFi and integrated with the bm3 app/editor for ease of use by end users and tuners. Stay tuned for the release of many of the other new features we’ve been working on over the past year and more to follow on this board as firmware development is completed.
    Some pictures of the board design below:

    Read more


    bootmod3: GTS Startup Roar (Race Start) for BMW F and G series B58 and B48 engine vehicles, including A90 Toyota Supra

    By Bertan Kazazic

    bootmod3: GTS Startup Roar (Race Start) for BMW F and G series B58 and B48 engine vehicles, including A90 Toyota Supra

    UPDATE: 0.10.083 is now out. Joining the club with the S55 and recent N55 release, map configuration now also includes Startup Roar for B58 and B48 F and G series vehicles, including the A90 Supra!

    As usual, Web version is up to date with the latest, android some time later today and iOS once Apple approves the app release (anywhere between 1-5 days if no complaints from their end).

    More updates to follow soon!

    Read more


    bootmod3 for BMW B48 Engine Vehicles - Now Available! BMW Fxx Gxx 120I 125I 220I 225I 320I 330I 420I 430I 520I 530I X3/X4 20I 30I

    By Srdjan Bajat

    bootmod3 closed beta for the B48 engines has been a great success and we're excited to announce the wait is finally over!

    Our development and testing teams have worked tirelessly on BMW B48 engine feature support over the past few months. Once B58 was released back in April focus shifted to B48 testing with a wider closed beta. Initial flash time that includes unlocking the DME is around 3 minutes and switching maps takes just 19 seconds using the standard ENET-OBD cable available on Amazon/eBay or through even some authorized dealers.

    Licenses and more info can be seen by clicking on the link provided below:

    https://www.protuningfreaks.com/collections/bootmod3-menu/products/bootmod3-b48-bmw-fxx-gxx-tune

    B48 FEATURES INCLUDED WITH PURCHASE TODAY

    Top speed limiter removal
    Exhaust burble adjustments in app on any map (OTS and custom)
    Exhaust flap adjustments
    Cold start (cat heating on startup) removal for quieter cold start
    Cat efficiency check (CEL) removal for de-cat downpipes (for off-road use)
    Maps for upgraded turbos
    E85, race gas and meth injection tuning
    Custom Throttle mapping

    Power and torque gains differ between the 20i and 30i models due to slight changes in engine setup as well as factory power curves. Here is a breakdown of the gains in percentages compared to stock, see below. We're also attached some sample dyno graphs on a 20i and a 30i test vehicles.

    B48 20i:
    Stage 1 91 octane: up to 42% HP / 46% TQ
    Stage 1 93 octane: up to 46% HP / 48% TQ
    Stage 1 E30 octane: up to 53 % HP / 50% TQ
    Stage 2 91 octane: up to 50% HP / 48% TQ
    Stage 2 93 octane: up to 54% HP / 50% TQ
    Stage 2 E30 octane: up to 60% HP / 55% TQ

    B48 30i
    Stage 1 91 octane: up to 14% HP / 26% TQ
    Stage 1 93 octane: up to 16% HP / 26% TQ
    Stage 1 E30 octane: up to 20% HP / 28% TQ
    Stage 2 91 octane: up to 16% HP / 28% TQ
    Stage 2 93 octane: up to 18% HP / 28% TQ
    Stage 2 E30 octane: up to 22% HP / 30% TQ
    Stage 2 AGG (Aggressive burble) versions of maps available
    Race gas maps are on the way!

    B48 engine BMW Vehicles supported (if your B48 vehicle is not listed please inquire with us):
    2016–2019 F20/F21 120i/125i
    2016–present F22/F23 220i/230i
    2016–2019 F30/F31/F34 320i/330i
    2016–present F32/F33 420i/430i
    2016-present F32/F33/F36 420i/430i
    2017–present G30/G31 520i/530i
    2017-present G01 X3 20i/30i
    2018-present G02 X4 20i/30i

    NOTE: Latest G series model support (e.g. 2019 G20 330i) come with a different flavor of the Bosch MG1 DME (MG1 Aurix) and support for their OBD unlock is coming out very soon.


    Its been a ton of fun working through the initial development and w're really looking forward to seeing where the platform takes us from here!

    Read more

    Recent Articles

    Categories